Machine Description 3
Intermediate universal shaft 3.3
EasyCut F 320 M
Original Operating Instructions 150000808_01_en 31
KMG000-021
The machine data are specified on the type plate (1). The type plate is mounted on the face
side on the carrying bar.
Information for enquiries and orders
If you have any further queries on the machine or if you want to order spare parts, always enter
type designation, vehicle identification number and year of manufacture of the corresponding
machine. To ensure that these data are always available, we recommend to enter them in the
fields on the front cover page of these operating instructions.
3.3 Intermediate universal shaft
To ensure the functionality and to increase the lifetime, the friction clutch must be vented once a
year before the beginning of the season, refer to page63.
KMG000-014
The intermediate universal shaft(1) for the mower drive is connected with the friction clutch(2)
towards the input gearbox. The friction clutch protects the tractor and the machine from
damage.
To Next Page
Loading...
Need help?
General
