2 Safety
2.4 Basic safety instructions
20
EasyCut F 320 M
Original Operating Instructions 150000808_01_en
2.4.15 Parking the machine safely
An improperly parked machine may move uncontrollably or tip over. People may be injured or
killed.
Park the machine on a horizontal and level ground capable of bearing the load.
Before adjusting, repairing, servicing and cleaning the machine, ensure that it is securely
positioned.
Note section “Parking the Machine” in chapter Driving and Transport, refer to page51.
Unattended parking
Adults and especially children are at risk from an inadequately secured and unattended parked
machine.
Before parking it: Shut down and safeguard the machine, refer to page24.
2.4.16 Consumables
Unsuitable consumables
Consumables which do not comply with the requirements of the manufacturer may impair the
operational safety of the machine and cause accidents.
Use only consumables which comply with the requirements of the manufacturer.
For requirements on consumables, refer to page32.
Environmental protection and disposal
Consumables such as diesel fuel, brake fluid, antifreeze and lubricants (e.g. gearbox oil,
hydraulic oil) may damage the environment and the health of people.
Do not release consumables into the environment.
Fill consumables in a liquid-tight labelled container and dispose of according to the official
regulations.
Absorb leaked consumables with an absorbent material, fill them in a liquid-tight labelled
container and dispose of according to the official regulations.
2.4.17 Dangers arising from environment
Danger of fire
Flammable materials may accumulate in the machine due to operation or animals, for example
rodents or nesting birds.
In case of dry usage conditions, dust, impurities and crop residues may inflame on hot parts and
the resulting fire could seriously hurt people or kill them.
Check and clean the machine every day before using it for the first time.
Check and clean the machine regularly during the working day.
To Next Page
Loading...
Need help?
General
