Safety
18
Pos: 11.12 /Übersc hriften/Überschrif ten 2/K-O/L age der Sicher heitsaufkleber a n derM aschine @ 0\mod_11956 34967326_78.d ocx @ 1020 @ 2 @ 1
4.12 Position of the Adhesive Safety Stickers on the Machine
Pos: 11.13 /BA/Sic herheit/Auf kleber/EasyCut/Sic herheitsaufkle ber EasyCut R2 80/320 @ 87\ mod_13206599 13503_78.doc x@ 746334 @ @ 1
GL
3422
2
3
4
4
1
2
5
EC-326-1
Fig. 2
1) Order No. 27 007 982 0 (1x)
a) Before placing the machine into
operation, read the operating instructions
and safety instructions. Both must be
heeded.
b) Keep the stipulated safe distance from
power transmission lines.
c) The PTO speeds must not exceed 540
rpm! The operating pressure of the
hydraulic system must not exceed 200
bar!
1a)
1b)
1c)
MAX. 540/min
MAX. 200 bar
2)
While parts are moving, never reach into
areas where there is a risk of being crushed.
942 459-0
Order No. 942 459-0 (4x)
3)
While parts are moving,
never reach into areas
where there is a risk of
being crushed.
Order No. 942 196 1 (2x)
942 196 -1
To Next Page
Loading...
Need help?
General
