TUNING THE ENGINE 17
133
17.4 Changing the mapping (EXC‑F Six Days)
Warning
Voiding of the government approval for road use and the insurance coverage If the combination switch is
mounted, the vehicle’s road permit, if any, expires.
– Only operate the vehicle in closed-off areas remote from public road traffic if the combination switch
is installed.
Info
The desired engine characteristic can be activated via the MAP button on the combination switch.
The setting most recently selected is activated again when restarting.
The traction control can also be activated in each mapping using the TC button.
The mapping can also be changed during the ride.
H02889-01
Activating STANDARD mapping:
– Press button MAP until LED 1 lights up.
Guideline
Engine speed < 4,000 rpm
STANDARD – balanced response
H02886-01
Activating ADVANCED mapping:
– Press button MAP until LED 2 lights up.
Guideline
Engine speed < 4,000 rpm
ADVANCED – direct response
17.5 Adjusting the idle speed
Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
– Set the idle speed to the specified value. (Your authorized KTM workshop will be glad to help.)
To Next Page
Loading...
Need help?
General
