COMBINATION INSTRUMENT 7
27
Info
Repeatedly press the button briefly until the desired
function is reached.
If no button is pressed for 20 seconds, the settings are
automatically saved.
Briefly press
the button .
Activates the flashing display and changes to
the next display
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
Deactivates the flashing display and changes to
the next display
Press the but-
ton for 2–3
seconds.
No function
Wait 3 - 5
seconds.
Changes to the next display without changes
Wait 10 - 12
seconds.
Setup menu starts, stores the settings, and
changes to H or ODO.
7.10 Setting the unit of measurement
400329-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the
bottom right of the display.
–
Press the button for 2–3 seconds.
– Repeatedly press the button briefly until Km/h/Mph flashes.
In measurement unit mode, you can change the unit of measure-
ment.
Info
If no button is pressed for 5 seconds, the settings are auto-
matically saved.
Briefly press
the button .
Starts selection, activates Km/h display
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
Activates Mph display
Press the but-
ton for 2–3
seconds.
No function
Wait 3 - 5
seconds.
Changes to the next display, changes from
selection to the Setup menu
Wait 10 - 12
seconds.
Stores and closes the Setup menu
To Next Page
Loading...
Need help?
General
