KTM 250 EXC-F 2023 User Manual

12 SERVICE WORK ON THE CHASSIS
88
12.39 Checking the frame
S01316-10
– Check the frame for damage, cracking, and deformation.
» If the frame shows signs of damage, cracking, or deforma-
tion:
– Change the frame.
Guideline
Repairs on the frame are not permitted.
12.40 Checking the link fork
S01317-10
– Check the link fork for damage, cracking, and deformation.
» If the link fork exhibits damage, cracking, or deformation:
– Change the link fork.
Info
Always replace a damaged link fork. Repairing
the link fork is not authorized by KTM.
12.41 Checking the throttle cable routing
Warning
Danger of accidents The throttle cable can become kinked, trapped or blocked if it is not routed cor-
rectly.
If the throttle cable is kinked, trapped or blocked, the speed can no longer be controlled.
– Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
Preparatory work
– Remove the seat. ( p. 73)
– Remove the fuel tank. ( p. 79)

KTM 250 EXC-F 2023 Specifications

General

Engine	Single-cylinder, 4-stroke
Displacement	249.9 cc
Bore x Stroke	78 mm x 52.3 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
ABS	No
Seat Height	960 mm
Ground Clearance	370 mm
Fuel System	Electronic Fuel Injection
Front Brake	Disc brake, Ø 260 mm
Rear Brake	Disc brake, 220 mm
Fuel Tank Capacity	9 liters
Frame	Central tube frame made of chrome molybdenum steel tubing
Rear Suspension	WP XPLOR shock absorber