KTM 250 EXC-F EU 2018 User Manual

12 SERVICE WORK ON THE CHASSIS
68
12.11 Installing the lower triple clamp (EXC‑F EU/AU/BR)
B01605-10
Main work
– Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease ( p. 162)
– Insert the lower triple clamp with the steering stem. Mount the
upper steering head bearing.
–
Check whether upper steering head seal
1
is correctly posi-
tioned.
–
Slide on protective ring
2
and O-ring
3
.
K00548-11
– Position the upper triple clamp with the handlebar.
–
Mount screw
4
but do not tighten yet.
– Secure wiring harness and clutch line with cable holder.
– Position the voltage regulator, and mount and tighten
screws
5
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
H01672-10
– Position the fork legs.
Bleeder screws
6
are positioned toward the front.
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the top edge of the upper triple clamp.
V00464-10
–
Tighten screws
7
.
Guideline
Screw, bottom triple
clamp
M8 15 Nm (11.1 lbf ft)

KTM 250 EXC-F EU 2018 Specifications

General

Brand	KTM
Model	250 EXC-F EU 2018
Category	Motorcycle
Language	English