KTM 250 EXC-F EU 2018 User Manual

12 SERVICE WORK ON THE CHASSIS
95
E00339-10
– Inject the liquid into the system until it escapes from open-
ings
6
of the master cylinder without bubbles.
– Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
– Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
– Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim
4 mm (0.16 in)
– Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
12.47 Removing the engine guard (EXC‑F AU, EXC‑F Six Days)
H01638-10
–
Remove screws
1
and engine guard.
12.48 Installing the engine guard (EXC‑F AU, EXC‑F Six Days)
H01638-10
– Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)

KTM 250 EXC-F EU 2018 Specifications

General

Brand	KTM
Model	250 EXC-F EU 2018
Category	Motorcycle
Language	English