12 SERVICE WORK ON THE CHASSIS
77
12.21 Removing the seat
V00342-10
–
Remove screws
1
.
– Raise the rear of the seat, pull the seat back, and lift it off.
12.22 Mounting the seat
V00343-10
– Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
– Make sure that the seat is correctly locked in.
V00342-10
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
12.23 Removing the air filter box cover
K00554-10
Condition
The air filter box cover is secured.
–
Remove screw
1
.