21OPERATING THE MACHINE
ENGLISH
STARTING
BSeat
To avoid personal injury:
A Make adjustments to the seat only while the
machine is stopped.
A Make sure that the seat is completely secured
after each adjustment.
A Do not allow any person other than the driver to
ride on the machine.
C Travel adjustment
Pull up the position adjust lever and slide the seat
backward or forward, as required. The seat will lock in
position when the lever is released.
A After adjusting the operator's seat, be sure to check
that the seat is properly locked.
BHead Light Switch
Turn the light switch clockwise, and the following lights are
activated on the switch position.
A High beam indicator will be on when head light switch
is in "High beam" position.
BHorn Button
The horn will sound when the key switch is in the "ON"
position and the horn button pressed.
1. Adjust the operator's position.
(1) Seat (A) "PULL UP"
(2) Position adjust lever
2. Select the light switch positions.
(1) Head light switch
Light name
Switch Position
(A) (B) (C)
Head light(Low Beam) OFF ON ---
Head light(High Beam) OFF --- ON
High beam indicator OFF OFF ON
(1) Horn button (A) "PUSH"
To Next Page
Loading...
Need help?
General
