37OPERATING THE GRASS CATCHER
ENGLISH
QUICK CLEAN LEVER
BFront Quick Clean Lever
The front quick clean lever is designed for discharging the
grass, which is plugged at the outlet of the mower.
To operate:
1. Park the machine on a level surface.
2. Pull the PTO lever to the "DISENGAGED" position.
And allow the blades to stop before operating the
lever.
3. Rotate the lever back and forth several times.
4. After use, replace the lever to the original position.
A To effectively discharge the grass, be sure to rotate
the lever several times.
BRear Quick Clean Lever
The rear quick clean lever is designed for discharging the
grass, which is plugged at the rear of the duct.
To operate:
1. Pull the PTO lever to the "DISENGAGED" position.
And allow the blades to stop before operating the
lever.
2. Pull up the lever several times.
A To effectively discharge the grass from the duct, be
sure to push down the lever several times.
(1) Front quick clean lever
(1) Rear quick clean lever
To Next Page
Need help?
General
