Kubota G23-2 User Manual

MOWER MOUNTING10
ENGLISH
16.Shut off the engine.
ADJUSTING THE MOWER DECK (FRONT
TO REAR)
To avoid personal injury:
A Shut off the engine and remove the key.
A Set the parking brake.
A Allow the blades to stop before making
adjustments.
A Wear heavy gloves or wrap end of the blade
with a rag when you handle blades; Blades may
be sharp.
1. Park the machine on a level surface.
2. Tire inflation pressure must be correct.
(See "TIRE AND WHEELS" section.)
3. Raise the mower lift lever to the top position.
Turn the cutting height control dial to adjust height to
the desired height.
4. Lower the mower deck by pushing the mower lift lever
forward.
5. Turn the left blade so that it is parallel to the machine
direction.
6. Make sure the mower blades are level. Then tighten
the lock nuts securely.
Adjust bolts with the lock nut so that A is 0 to 5 mm.
A = (Y) - (X)
ADJUSTING THE MOWER DECK (SIDE TO
SIDE)
To avoid personal injury:
A Shut off the engine and remove the key.
A Set the parking brake.
A Allow the blades to stop before making
adjustments.
A Wear heavy gloves or wrap end of the blade
with a rag when you handle blades; Blades may
be sharp.
1. Park the machine on a level surface.
2. Tire inflation pressure must be correct.
(See "TIRE AND WHEELS" section.)
3. Raise the mower lift lever to the top position.
Turn the cutting height control dial to adjust height to
the desired height
4. Lower the mower deck by pushing the mower lift lever
forward.
5. Turn the left blade so that it is parallel to rear axle.
6. Measure from outside blade tip (L) to the level surface.
Then turn the right blade so that it is parallel to rear
axle. Measure from outside blade tip (R) to the level
surface.
(1) Lock nut
(2) Adjusting bolt

Kubota G23-2 Specifications

General

Brand	Kubota
Model	G23-2
Category	Lawn Mower
Language	English