EasyManuals Logo
Home>Kubota>Lawn Mower>G23-2

Kubota G23-2 User Manual

Kubota G23-2
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
PERIODIC SERVICE54
ENGLISH
BChecking Gear Box Oil Level
To avoid personal injury:
A Always stop the engine and remove the key
before checking oil.
1. Park the machine on a flat surface and lower the
mower to the ground.
To check the oil level, draw out the dipstick, wipe it
clean, replace it, and draw it out again. Check to see
that the oil level lies between the two notches.
If the level is too low, add new oil to the prescribed
level at the oil inlet.
(See "LUBRICANTS, FUEL AND COOLANT" in
"MAINTENANCE" section.)
A Check the oil level of the transmission case with the
mower lifted up.
A If oil level is low, do not run the engine.
BGreasing
To avoid personal injury:
A Be sure to stop the engine and remove the key
before greasing.
Grease the following locations.
(1) Oil level dipstick (A) Oil level is acceptable within
this range
(1) Front axle (King pin)
(1) Front axle (Center pin)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota G23-2 and is the answer not in the manual?

Kubota G23-2 Specifications

General IconGeneral
BrandKubota
ModelG23-2
CategoryLawn Mower
LanguageEnglish

Related product manuals