OPERATING THE MACHINE22
ENGLISH
BMower Lift Lever
The mower lift lever is used to raise and lower the mower.
To lower the mower, push the lever FORWARD.
To raise it, pull the lever BACKWARD.
BGrass Container Control Lever
The Grass container control lever is used to dump and
close the grass catching container.
Before operation:
Pull the PTO lever to the "DISENGAGED" position. And
allow the blades to stop.
[G23-2]
To dump the grass, pull the lever BACKWARD (B).
To close the container, push the lever FORWARD (A).
[G26-2]
Move the grass container control lever to the Right Rear
(A) to lift the container. Move it to the Right Front (B) to
lower it.
With the container raised, move the control lever to the
Left Rear (C) and the container will tilt backward to
discharge grass. Move it to the Left Front (D) and the
container will back in the original position.
3. Start the engine.
See "OPERATING THE ENGINE"
section.
4. Raise the implement.
(1) Mower lift lever : "DOWN"
: "UP"
(1) PTO lever : "ENGAGED"
: "DISENGAGED"
(1) PTO lever
(2) Grass container control lever
(A) "CLOSE"
(B) "DUMP"
(1) Grass container control lever
(2) PTO lever
(A) "UP
(B) "DOWN"
(C) "TILT BACKWARD"
(D) "TILT FORWARD"