OPERATING THE MACHINE28
ENGLISH
BHydrostatic Transaxle Bypass Button
A Do not push the machine without pushing the bypass
button or transmission damage may occur.
A Never push the button with the engine running.
1. To push the machine, push the HST bypass button.
2. After starting the engine, the button will return
automatically to normal position.
OPERATING TECHNIQUES
BDifferential Lock
To avoid personal injury due to the loss of steering
control:
A Do not operate the machine at high speed with
differential lock engaged.
A Do not attempt to turn with the differential lock
engaged.
A Be sure to release the differential lock before
making a turn in the field conditions.
If one of the rear wheel should slip, step on the differential
lock pedal. Both wheels will then turn together, reducing
slippage.
Differential lock is maintained only while the pedal is
depressed.
A When using the differential lock, always slow the
engine down.
A To prevent damage to power train, do not engage
differential lock when one wheel is spinning and the
other is completely stopped.
A If the differential lock cannot be released in the above
manner, alternately press speed control pedal forward
and backward slightly.
(1) HST bypass button
(1) Differential lock pedal (A) Press to "ENGAGE"
(B) Release to "DISENGAGE"
To Next Page
Loading...
Need help?
General
