Name: KYMCO Xciting 300i
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

BRAKE LEVER ADJUSTER

BRAKE FLUID

Brake fluid level:

(see page 88)

DOT 4

Other checks:

There is an adjuster on both the brake levers. Each

adjuster has 4 positions so that the released lever

position can be adjusted to suit the operator's hands.

Push the lever (1) forward and turn the adjuster (2) to

align the number with the arrow mark (3) on the lever

holder. The distance from the grip to the released lever is

minimum at number 4 and maximum at number 1.

With the scooter in an upright position, check the front

and rear fluid level. It should be above the lower level

mark. If the level is at or below the lower level mark " ",

check the brake pads for wear .

Worn pads should be replaced. If the pads are not worn,

have your brake system inspected for leaks.

The recommended brake fluid is brake fluid from a

sealed container, or an equivalent.

Make sure there are no fluid leaks. Check for

deterioration or cracks in the hoses and fittings.

Push

(1)

(2)

(3)

Other manuals for KYMCO Xciting 300i

Questions and Answers:

Need help?

Do you have a question about the KYMCO Xciting 300i and is the answer not in the manual?

General