Name: KYMCO Xciting 300i
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

STORAGE GUIDE

Extended storage, such as for winter, requires that you take certain steps to reduce the

effects of deterioration from non-use of the scooter. In addition, necessary repairs should

be made before storing the scooter; otherwise, these repairs may be forgotten by the time

the scooter is removed from storage.

Storage

1. Change the engine oil and filter.

2. Make sure the cooling system is filled with a 50/50% antifreeze solution.

3. Drain the carburetor and empty the fuel tank into an approved petrol container using a

commercially available hand siphon or an equivalent method. Spray the inside of the

tank with an aerosol rust-inhibiting oil. Reinstall the fuel fill cap on the tank.

Petrol is highly flammable and explosive. You can be burned or seriously injured

when handling fuel.

Stop the engine and keep heat, sparks, and flame away.

Refuel only outdoors

Wipe up spills immediately.

WARNING

104

Other manuals for KYMCO Xciting 300i

Questions and Answers:

Need help?

Do you have a question about the KYMCO Xciting 300i and is the answer not in the manual?

General