KYMCO Xciting 300i User Manual

BRAKE PAD WEAR
Front right/left brake
Rear brake
Brake pad wear depends upon the severity of usage, the
type of riding, and road conditions. (Generally, the pads
will wear faster on wet and dirty roads.) Inspect the pads
at each regular maintenance interval.
Check the cutout in each pad.
If either pad is worn to the cutout, replace both pads as a
set. See your KYMCO dealer for this service.
Check the cutout in each pad.
If either pad is worn to the cutout, replace both pads as a
set. See your KYMCO dealer for this service.
88

KYMCO Xciting 300i Specifications

General

Cooling System	Liquid-cooled
Fuel System	Electronic Fuel Injection
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Seat Height	800 mm
Compression Ratio	10.5:1
Max Torque	23.5 Nm @ 6500 rpm
Starting System	Electric
Front Tire	120/70-15
Rear Tire	150/70-14
Wheelbase	1565 mm
Engine Type	Liquid-cooled, 4-stroke, SOHC
Rear Suspension	Dual shock
Bore x Stroke	72.7 x 72 mm
Ignition	Electric