KYMCO Xciting 300i User Manual

TOOL KIT
(see page 34)
CRANKCASE BREATHER
To assist you in the performance of periodic
maintenance, a tool kit (1) is supplied and located under
the seat .
1. Remove the crankcase breather tube plug (2) from the
tube and drain deposits into a suitable container.
2. Reinstall the crankcase breather tube plug.
Service more frequently when riding in rain, at full throttle,
or after the scooter is washed or overturned. Service if
the deposit level can be seen in the transparent section
of the drain tube.
(1)
(2)
66

KYMCO Xciting 300i Specifications

General

Cooling System	Liquid-cooled
Fuel System	Electronic Fuel Injection
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Seat Height	800 mm
Compression Ratio	10.5:1
Max Torque	23.5 Nm @ 6500 rpm
Starting System	Electric
Front Tire	120/70-15
Rear Tire	150/70-14
Wheelbase	1565 mm
Engine Type	Liquid-cooled, 4-stroke, SOHC
Rear Suspension	Dual shock
Bore x Stroke	72.7 x 72 mm
Ignition	Electric