Name: KYMCO Xciting 300i
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

FRONT AND REAR SUSPENSION

INSPECTION

1. Check the fork assembly by locking the front

brake and pumping the fork up and down

vigorously. Suspension action should be

smooth and there must be no oil leakage.

2. Swing arm bearings should be checked by

pushing hard against the side of the rear

wheel while the scooter is on the center

stand. Free play indicates worn bearings.

3. Carefully inspect all front and rear

suspension fasteners for tightness.

A higher concentration of antifreeze decreases

the cooling system performance and is

recommended only when additional protection

against freezing is needed. A concentration of

less than 40:60 (40% antifreeze) will not

provide proper corrosion protection. During

freezing temperatures, check the cooling

system frequently and add higher

concentrations of antifreeze (up to a maximum

of 60% antifreeze) if required.

Other manuals for KYMCO Xciting 300i

Questions and Answers:

Need help?

Do you have a question about the KYMCO Xciting 300i and is the answer not in the manual?

General