KYMCO Xciting 300i User Manual

COOLANT
Inspection
The reserve tank is under footboard left.
Check the coolant level through the inspection window (1) at the
left side skirt while the engine is at the normal operating
temperature with the scooter in an upright position. If the coolant
level is below the LOWER level mark (3), remove the left floor
mat (4) and remove screw (5) and reserve tank lid (6) and reserve
tank cap (7) and add coolant mixture until it reaches the upper
level mark (2). Always add coolant to the reserve tank. Do not attempt
to add coolant by removing the radiator cap.
If the reserve tank is empty, or if coolant loss is excessive, check for leaks and see your KYMCO
dealer for repair.
F
L
(1)
(2)
(4)
(6)
(5)
(3)
(7)
83

KYMCO Xciting 300i Specifications

General

Cooling System	Liquid-cooled
Fuel System	Electronic Fuel Injection
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Seat Height	800 mm
Compression Ratio	10.5:1
Max Torque	23.5 Nm @ 6500 rpm
Starting System	Electric
Front Tire	120/70-15
Rear Tire	150/70-14
Wheelbase	1565 mm
Engine Type	Liquid-cooled, 4-stroke, SOHC
Rear Suspension	Dual shock
Bore x Stroke	72.7 x 72 mm
Ignition	Electric