EasyManuals Logo

KYMCO Xciting 300i User Manual

KYMCO Xciting 300i
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #108 background imageLoading...
Page #108 background image
TIRES
Failure to follow these warnings may
result in an accident due to tire failure.
The tires on your scooter form the
crucial link between your scooter and
the road.
Follow these instructions:
Check tire condition and pressure,
and adjust pressure before each ride.
Avoid overloading your scooter.
Replace a tire when worn to the
specified limit, or if you find damage
such as cuts or cracks.
Always use the size and type of tires
specified in this owner's manual.
Balance the wheel after tire
installation.
Read this section of owner's manual
carefully.
!
!
!
!
!
!
Failure to perform break-in of the tires
could cause tire slip and loss of
control.
Use extra care when riding on new
tires. Perform proper break-in of the
tires referring to the break-in section
and avoid hard acceleration, hard
cornering, and hard braking for the first
Check the tire inflation pressure and tire
tread condition at the periodic inspection.
For maximum safety and good tire life, the
tire pressures should be inspected more
often.
WARNING WARNING
95

Other manuals for KYMCO Xciting 300i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO Xciting 300i and is the answer not in the manual?

KYMCO Xciting 300i Specifications

General IconGeneral
Cooling SystemLiquid-cooled
Fuel SystemElectronic Fuel Injection
TransmissionCVT
Front SuspensionTelescopic fork
Front BrakeDisc
Rear BrakeDisc
Seat Height800 mm
Compression Ratio10.5:1
Max Torque23.5 Nm @ 6500 rpm
Starting SystemElectric
Front Tire120/70-15
Rear Tire150/70-14
Wheelbase1565 mm
Engine TypeLiquid-cooled, 4-stroke, SOHC
Rear SuspensionDual shock
Bore x Stroke72.7 x 72 mm
IgnitionElectric

Related product manuals