KYMCO Xciting 300i User Manual

RIGHT HANDLEBAR SWITCH
Headlight switch (1)
position
position
position
Electric starter button " " (2)
NOTE:
" "
The headlight and taillight turn on.
" "
The position light and taillight turn on.
""
The headlight and taillight turn off.
Push in the electric starter button to rotate the starter
motor.
If the brake lever is not squeezed, the starter motor will
not rotate.
This scooter is equipped with interlock switches for the
ignition circuit and the starter circuit. The engine can
only be started if the side stand is fully up.

!
!
To prevent electrical system
damage, do not operate the
starter motor more than five
seconds at a time.
CAUTION
(1)
(2)
25

KYMCO Xciting 300i Specifications

General

Cooling System	Liquid-cooled
Fuel System	Electronic Fuel Injection
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Seat Height	800 mm
Compression Ratio	10.5:1
Max Torque	23.5 Nm @ 6500 rpm
Starting System	Electric
Front Tire	120/70-15
Rear Tire	150/70-14
Wheelbase	1565 mm
Engine Type	Liquid-cooled, 4-stroke, SOHC
Rear Suspension	Dual shock
Bore x Stroke	72.7 x 72 mm
Ignition	Electric