KYMCO Xciting 300i User Manual

SIDE STAND
Perform the following maintenance in accordance with
the maintenance schedule.
Functional check:
Check the spring for damage or loss of tension and the
side stand assembly for freedom of movement.
Check the side stand ignition cut-off system:
1. Place the scooter on its center stand.
2. Put the side stand up and start the engine.
3. Lower the side stand. The engine should stop as you
put the side stand down.
If the side stand system does not operate as described,
see your KYMCO dealer for service.
!
!
Side stand up
Side stand down
86

KYMCO Xciting 300i Specifications

General

Cooling System	Liquid-cooled
Fuel System	Electronic Fuel Injection
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Seat Height	800 mm
Compression Ratio	10.5:1
Max Torque	23.5 Nm @ 6500 rpm
Starting System	Electric
Front Tire	120/70-15
Rear Tire	150/70-14
Wheelbase	1565 mm
Engine Type	Liquid-cooled, 4-stroke, SOHC
Rear Suspension	Dual shock
Bore x Stroke	72.7 x 72 mm
Ignition	Electric