8-18
Setup and Registration (System Menu) > System Menu
Timer Setting
[
System Menu/Counter
] key > [
ā²
] [
ā¼
] key > [
Common Settings
] > [
OK
] key > [
ā²
] [
ā¼
] key > [
Timer Setting
] > [
OK
] key
Configure settings related to the time.
Item Description
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
The time allowed to elapse before the panel is reset is set with the "PanelReset TimerPanel
Reset Timer".
PanelReset Timer (page 8-18)
PanelReset Timer
If you select [
On
] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
This function is displayed when [
Auto Panel Reset
] is set to [
On
].
Sleep Level (models except for
Europe)
*1
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than
Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
(Detailed settings)
Set whether to use the Energy Saver mode for the following functions individually:
ā¢Network
ā¢ Card Reader
*2
ā¢FAX
*3
Value: Off, On
When the machine enters Energy Saver, the ID card cannot be recognized.
Sleep Rules (models for
Europe)
Select whether to use the Sleep mode for the following functions individually:
ā¢Network
ā¢ Card Reader
*2
ā¢FAX
*3
Value: Off, On
When the machine enters Energy Saver, the ID card cannot be recognized.
Sleep Timer
Set amount of time before entering Sleep.
Value
For Europe
1 to 60 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Sleep and Auto Sleep (page 2-20)
Auto Err. Clear
If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On
To Next Page
Loading...
Need help?
General
