8-34
Setup and Registration (System Menu) > System Menu
Op Functions
[
System Menu/Counter
] key > [
ā²
] [
ā¼
] key > [
System/Network
] > [
OK
] key > [
ā²
] [
ā¼
] key > [
Op Functions
] > [
OK
] key
Adjust/Maint.
[
System Menu/Counter
] key > [
ā²
] [
ā¼
] key > [
Adjust/Maint.
] > [
OK
] key
Adjust printing quality and conduct machine maintenance.
Item Description
Op Functions
You can use the optional applications installed on this machine.
Optional Applications (page 11-9)
Item Description
Quiet Mode
Lower print and scan speed for quiet processing.
Quiet Mode
Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
Each Job
It is possible to set the use of Quiet Mode for each job, such as copying and sending. Set
whether or not to permit the setting for each job.
Value: Permit, Prohibit
Copy Denst. Adj.
Adjust copy density.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Send/Box Density
Adjust scan density when sending or storing the data in Document Box.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Contrast (Copy)
Increases or decreases the overall contrast of copies.
Value: -3, -2, -1, 0, 1, 2, 3
Contrast (Send)
Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value: -3, -2, -1, 0, 1, 2, 3
Background Density
Darkens or lightens overall background density adjustment.
Copy (Auto)
Darkens or lightens overall background density adjustment during copying.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Send/Box (Auto)
Darkens or lightens overall background density when sending images or storing them in the
Document Box.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
AutoColorCorrect
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 1 to 5
Correct. Bk Line
Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value
Off: No correction performed. Select this when you want to reproduce fine lines in the
original more clearly than with [On (Low)].
On (Low): Correction performed.
On (High): Select this item if a streak remains after using [On (Low)]. The reproduction
of fine lines on the original may become lighter than when using On (Low).
To Next Page
Loading...
Need help?
General
