Kyocera ECOSYS M8130cidn User Manual

8-18
Default Setting of FAX [System Menu] > Transmission Restriction
Setting Send Restriction
Restrict the other parties to which you send originals only to the ones registered in Permit FAX No. and Permit ID No. as
well as the ones registered in the Address Book.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [TX Restriction]
2
Configure the settings.
To not use the sending restriction, select [Off].
To restrict the other parties to which you send originals only to the ones registered in Permit FAX No. and Permit
ID No. as well as the ones registered in the Address Book, select [Permit List + Address Book].
Setting Reception Restriction
Restrict incoming faxes so that you only receive originals from senders registered in Permit FAX No. and Permit ID No.
and senders registered in your Address Book. This mode also allows you to set a [Reject List] for Reception Restriction
so that reception from senders on the list of Rejected FAX numbers or from senders whose Local FAX Number is not
registered are rejected. (You can select whether reception from a party whose local fax number is not registered is
allowed or rejected in “Unknown Number Reception”.)
Unknown Number Reception (8-18)
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [RX Restriction]
2
Configure the settings.
To not use the reception restriction
[Off]
To restrict the other parties from which you receive originals only to the ones registered in Permit FAX
No. and Permit ID No. as well as the ones registered in the Address Book
[Permit List + Address Book].
To block incoming faxes from senders registered in Reject FAX No.
[Reject List].
Unknown Number Reception
Select whether to receive the fax of that the number is unknown when [Reject List] is set for Reception Restriction. To
change the reception restriction for the unknown fax number, follow the steps below.
1
Display the screen.
[System Menu] key > [FAX] > [TX/RX Restriction] > [Unknown Number Reception]
2
Configure the settings.
To receive faxes from the unknown number
[Allowed]
To reject faxes from the unknown number
[Reject]

Kyocera ECOSYS M8130cidn Specifications

General

Secure printing	Yes
Print technology	Laser
Time to first page (black, normal)	6.5 s
Time to first page (color, normal)	8.3 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	7.4 s
Time to first copy (color, normal)	9.3 s
Scan to	E-mail, FTP, Fax, SMB, TWAIN, USB, WIA
Scan drivers	TWAIN, WIA
Scanner type	-
Maximum scan area	A3 (297 x 420) mm
Faxing	Color faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax transmission speed	2 sec/page
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (sleep)	0.5 W
Power consumption (standby)	70 W
Power consumption (printing)	600 W
Power consumption (PowerSave)	40 W
Power consumption (average operating)	- W
Processor cores	2
Processor family	ARM
Processor frequency	1200 MHz
Maximum internal memory	3000 MB
Paper input type	Cassette, Paper tray
Total input capacity	500 sheets
Total output capacity	- sheets
Maximum input capacity	1600 sheets
Multi-Purpose tray input capacity	100 sheets
Paper tray media types	Plain paper
Non-ISO print media sizes	Folio (media size), Ledger (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Multi-purpose tray media types	Legal, Letter
Maximum ISO A-series paper size	A3
Maximum duty cycle	- pages per month
Page description languages	OpenXPS, PCL 5e, PCL 6, PCL XL, PostScript 3, XPS
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Black, White
Market positioning	Business
Harmonized System (HS) code	84433100

Weight and Dimensions

Width	590 mm
Height	753 mm