Kyocera ECOSYS M8130cidn User Manual

10-3
Troubleshooting > Responding to Messages
Responding to Messages
When an error occurs, the display may show one of the messages listed below. These will help you identify and correct
the problem.
NOTE
When a transmission error occurs, a sent/receipt result report is produced.
Check the error code shown in the report and refer to the following:
Error Code List (10-5)
To print the sent/receipt result report, refer to the following:
Printing Send Result Reports (7-4)
Printing FAX RX Result Reports (7-6)
You may also check error codes using the activity report.
Activity Report (Outgoing FAX Report and Incoming FAX Report) (7-7)
Message Checkpoint Corrective Action
Reference
Page
Add paper in cassette #. Is the indicated cassette out of
paper?
Load paper. ―
Add the following paper in
cassette #.
Does the selected paper size
match the paper size loaded in
the specified paper source?
Select [Continue] to continue printing.
Select [Cancel] to cancel the job.
―
Is the indicated cassette out of
paper?
Load paper.
Select [Paper Selection] to select the
other paper source. Select [Continue] to
print on the paper in the currently
selected paper source.
―
Box limit exceeded. Is [End] displayed on the
screen?
The specified box is full, and no further
storage is available; Job is canceled.
Select [End]. Try to perform the job again
after printing or deleting data from the
box.
―
Cannot process this job. ― This job is canceled because it is
restricted by User Authorization or Job
Accounting. Select [End].
―
FAX box limit exceeded. ― Cannot print or forward the received FAX
data. Select [OK]. Delete documents from
the FAX box to make room for FAX
reception.
―
Job Accounting restriction
exceeded.
Is the acceptable printing count
restricted by Job Accounting
exceeded?
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more. This
job is canceled. Select [End].
Refer to the
machine’s
Operation
Guide.
Machine failure. ― Internal error has occurred. Make a note
of the error code displayed on the screen,
and contact your Service Representative.
―

Kyocera ECOSYS M8130cidn Specifications

General

Secure printing	Yes
Print technology	Laser
Time to first page (black, normal)	6.5 s
Time to first page (color, normal)	8.3 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	7.4 s
Time to first copy (color, normal)	9.3 s
Scan to	E-mail, FTP, Fax, SMB, TWAIN, USB, WIA
Scan drivers	TWAIN, WIA
Scanner type	-
Maximum scan area	A3 (297 x 420) mm
Faxing	Color faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax transmission speed	2 sec/page
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (sleep)	0.5 W
Power consumption (standby)	70 W
Power consumption (printing)	600 W
Power consumption (PowerSave)	40 W
Power consumption (average operating)	- W
Processor cores	2
Processor family	ARM
Processor frequency	1200 MHz
Maximum internal memory	3000 MB
Paper input type	Cassette, Paper tray
Total input capacity	500 sheets
Total output capacity	- sheets
Maximum input capacity	1600 sheets
Multi-Purpose tray input capacity	100 sheets
Paper tray media types	Plain paper
Non-ISO print media sizes	Folio (media size), Ledger (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Multi-purpose tray media types	Legal, Letter
Maximum ISO A-series paper size	A3
Maximum duty cycle	- pages per month
Page description languages	OpenXPS, PCL 5e, PCL 6, PCL XL, PostScript 3, XPS
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Black, White
Market positioning	Business
Harmonized System (HS) code	84433100

Weight and Dimensions

Width	590 mm
Height	753 mm