Kyocera ECOSYS M8130cidn User Manual

10-2
Troubleshooting > Indicators During Sending/Receiving Operation
Indicators During Sending/Receiving Operation
The [Processing] and [Memory] indicators show the fax transmission status.
• The [Processing] indicator blinks during fax transmission and reception.
• The [Memory] indicator blinks when source data is being stored in memory for memory transmission.
• The [Memory] indicator is lit when there is source data stored in the memory for delayed transmission.
Responding to an Attention Indicator Flashes
If the [Attention] indicator flashes, select the [Status/Job Cancel] key to check an error message. If the message is not
indicated on the touch panel when the [Status/Job Cancel] key is pressed or the attention indicator flashes for 1.5
seconds, check the following.
Symptom Checkpoints Corrective Action Reference
Page
Cannot send fax. Is the modular cord
connected correctly?
Connect the modular cord correctly. —
Is Permitted FAX No. or
Permitted ID No.
registered correctly?
Check Permitted FAX No. and Permitted ID No. 8-13
Has a communication
error occurred?
Check error codes in the TX/RX Result Report
and Activity Report. If the error code starts with
"U" or "E", perform the corresponding
procedure.
10-5
Is the destination FAX line
busy?
Send again. —
Does the destination FAX
machine respond?
Send again. —
Is there an error other
than above?
Contact your Service Representative. —

Kyocera ECOSYS M8130cidn Specifications

General

Secure printing	Yes
Print technology	Laser
Time to first page (black, normal)	6.5 s
Time to first page (color, normal)	8.3 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	7.4 s
Time to first copy (color, normal)	9.3 s
Scan to	E-mail, FTP, Fax, SMB, TWAIN, USB, WIA
Scan drivers	TWAIN, WIA
Scanner type	-
Maximum scan area	A3 (297 x 420) mm
Faxing	Color faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax transmission speed	2 sec/page
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (sleep)	0.5 W
Power consumption (standby)	70 W
Power consumption (printing)	600 W
Power consumption (PowerSave)	40 W
Power consumption (average operating)	- W
Processor cores	2
Processor family	ARM
Processor frequency	1200 MHz
Maximum internal memory	3000 MB
Paper input type	Cassette, Paper tray
Total input capacity	500 sheets
Total output capacity	- sheets
Maximum input capacity	1600 sheets
Multi-Purpose tray input capacity	100 sheets
Paper tray media types	Plain paper
Non-ISO print media sizes	Folio (media size), Ledger (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Multi-purpose tray media types	Legal, Letter
Maximum ISO A-series paper size	A3
Maximum duty cycle	- pages per month
Page description languages	OpenXPS, PCL 5e, PCL 6, PCL XL, PostScript 3, XPS
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Black, White
Market positioning	Business
Harmonized System (HS) code	84433100

Weight and Dimensions

Width	590 mm
Height	753 mm