10: Maintenance
Spider™ and SpiderDuo® KVM-over-IP Device User Guide 100
Figure 10-5 Event Log Page
2. Navigate between logs by clicking Prev and Next.
Unit Reset
In general, the Spider device requires a reset when implementing a firmware update. In the event
of an abnormal operation, a number of subsystems may be reset without resetting the entire
Spider device.
To reset the Spider device, perform the following steps.
1. Log into the Spider device as sysadmin.
2. Click Maintenance > Unit Reset. The following page displays.
To Next Page
Loading...
Need help?
General
