2: Overview
Spider™ and SpiderDuo® KVM-over-IP Device User Guide 23
Product Information Label
The Product Information Label on the back of the Spider family units contains the following
information:
Bar code
Serial number
Revision number
Hardware address (also known as the Ethernet or MAC address)
Manufacturing code
Figure 2-8 shows the Product Information Label.
Optional Items
Replacement mounting bracket kit (See Chapter 4: Mounting
Bracket Kit .)
PS/2 extended length cable: 1500mm, (59 in.) part number 500-
199-R
USB extended length cable: 1500mm, (59 in.) part number 500-
200-R
Interfaces
Network: 10/100Base-T Ethernet Port with activity indicators
(RJ45)
Serial: RS-232, up to 115,200 bps for serial device pass-through,
unit configuration or PCU controller
USB
Local KVM connector
Computer input connector
Environmental
Operating: 0º to 45º C (32º to 115º F)
Storage: -20º to 70º C (-4º to 158º F)
Humidity: 0 to 95% RH (non-condensing)
Heat Dissipation: 4 Watts (14 BTU/hr)
Power Requirements
Input 5VDC 2A Wall Adaptor, part number 520-104-R.
Dimensions (H x W x D)
13.2 x 5.8 x 3.6 cm (5.2 x 2.3 x 1.4 in) (See Figure 2-5 (PS/2) and
Figure 2-6 (USB) for cable dimensions.)
Weight
USB: 269g (9.50 oz)
PS/2: 278g (9.80 oz)
Shipping Weight
1.5 kg (3.3 lbs)
Table 2-7 SpiderDuo Technical Specifications (continued)
Component Specification
To Next Page
Loading...
Need help?
General
