Spider™ and SpiderDuo® KVM-over-IP Device User Guide 83
9: Services
This chapter describes the Spider and SpiderDuo KVP-over-IP services. It contains the following
sections:
Date/Time
Security
Certificate
Event Log
SNMP
KVM Search
Power Management
Date/Time
The Spider device contains an internal real time clock that maintains a basic date and time after
being set. The clock, however, will reset if the unit loses power. If an accurate date and time are
critical, the Spider device supports synchronization with Network Time Protocol servers. Internally,
the date and time are only used to timestamp events in the log and for the inactivity timeout.
To configure the date and time settings, perform the following steps.
1. Click Services > Date/Time. The Date/Time Settings page displays.
Figure 9-1 Date/Time Settings Page
To Next Page
Loading...
Need help?
General
