Lantronix Spider User Manual

11: Command Reference
Spider™ and SpiderDuo® KVM-over-IP Device User Guide 118
Description
Dumps the first 256 lines or 1M bytes of the specified file content of a USB thumb drive.
Reboot Commands
admin reboot
Syntax
admin reboot
Description
Immediately terminates all connections and reboots the device.
Diagnostic Commands
diag ping
Syntax
diag ping <IPV4 Address> | ping6 <IPV6 Address>
Description
Verifies if the Spider or SpiderDuo device can reach a host over the network.
Group Permissions
For group permissions, each user is a member of a group, and has a set of permissions
associated with the group. The group permissions are defined by permissions parameters.
A <Permission List> is a comma-separated list of user rights to be added to or removed from the
group current permissions. Precede the two-letter acronym with a '-' to remove a user right. For
example, 'nt,dt,-ka' adds Networking and Date/Time rights and removes KVM Console Access
rights. See the following list:
 br: Board Resetdk
 dk: Direct KVM
 dt: Date/Time Settings
 fc: Firmware/Config Management
 gp: Group Permissions
 ka: KVM Console Access
 ke: KVM Settings(Encoding)
 kx: KVM Settings(Exclusive Access)
 kh: KVM Settings(Hotkeys)
 km: KVM Settings(Monitor Mode)

Lantronix Spider Specifications

General

Brand	Lantronix
Model	Spider
Category	Network Hardware
Language	English