13–3
Data Format
For choosing the data format, as described on the previous page.
When “ASCII” has been selected, the primary “Setup ASCII Format”
menu will appear immediately beneath this menu, giving access to
the secondary “ASCII SETUP” menu (see next page). When
“Binary”
Setup ASCII Format
Appears only when “ASCII” is highlighted in “Data Format”, as shown
here. For accessing the secondary “ASCII SETUP” menu (see next
page).
Auto Store
For automatically storing waveforms after each acquisition. “Fill” stores
until the medium is filled, while “Wrap” stores continuously, discarding
— first-in–first-out — the oldest files.
DO STORE
To store in accordance with specifications made in the “store” and “to”
menus (see below).
store
For selecting the waveform. “All displayed” can only be selected when
storing to optional storage media .
to
To select the internal memories “M1”, “M2”, “M3”, or “M4”, when “Binary
is selected in the “Data Format” menu, as shown on the previous page.,
Or the optional “Card”, “Flpy” or “HDD”, when “ASCII” is selected from
the “Data Format” menu, as shown here.
To Next Page
Loading...
Need help?
General
