1–4
Read This First!
How to Return a ProductContact your country’s Customer Service Department or local
field office to find out where to return the product. All returned
products should be identified by model and serial number. You
should describe the defect or failure, and provide your name
and contact number. And in the case of products returned to the
factory, a Return Authorization Number (RAN) should be used.
The RAN can be obtained by contacting the Customer Service
Department.
Return shipments should be made prepaid. We cannot accept
COD (Cash On Delivery) or Collect Return shipments. We
recommend air-freighting.
It is important that the RAN be clearly shown on the outside of
the shipping package for prompt redirection to the appropriate
LeCroy department.
What Comes with Your Scope The following items are shipped
together with the standard configuration of this oscilloscope:
Ø Front Scope Cover
Ø 10:1 10 MΩ Passive Probe — one per channel
Ø ProBus Single-Channel Adapter (9354C, 9374C, 9384C
SERIES ONLY)
Ø Two 250 V T-rated Fuses (5 A or 6.3 A depending on model
— see Chapter 3)
Ø AC Power Cord and Plug
Ø Operator’s Manual (this manual)
Ø Remote Control Manual
Ø Hands-On Guide
Ø Performance Certificate
Ø Declaration of Conformity
Ø Warranty
Note: Wherever possible, please use the original shipping
carton. If a substitute carton is used, it should be rigid and
packed so that that the product is surrounded by a minimum
of four inches or 10 cm of shock-absorbent material.
To Next Page
Loading...
Need help?
General
