Action
2. Type in 192.168.253.2. The Web server is started. You will see the
home functions following:
•
Go to Work!
•
To select and start the Wake-up application.
•
Current Status
•
To access GNSS information of the GS as well as the instru-
ment rmware.
•
Instrument
•
To access conguration settings for the GS.
•
User
•
To upload and activate rmware, licence keys and lan-
guages.
4.2 Batteries
4.2.1 Operating Principles
•
The battery must be charged before using it the rst time, because it is
delivered with an energy content as low as possible or might be in sleep
mode.
•
The permissible temperature range for charging is from 0 °C to +40 °C/
+32 °F to +104 °F. For optimal charging, we recommend charging the
batteries at a low ambient temperature of +10 °C to +20 °C/+50 °F to
+68 °F if possible
•
It is normal for the battery to become warm during charging. Using the
chargers recommended by Leica Geosystems, it is not possible to charge
the battery once the temperature is too high
•
For new batteries or batteries that have been stored for a long time
(> three months), it is effectual to make only one charge/discharge cycle
•
For Li-Ion batteries, a single discharging and charging cycle is sufcient.
We recommend carrying out the process when the battery capacity indic-
ated on the charger or on a Leica Geosystems product deviates signic-
antly from the actual battery capacity available.
• The batteries can be operated from −20 °C to +55 °C/−4 °F to +131 °F.
•
Low operating temperatures reduce the capacity that can be drawn; high
operating temperatures reduce the service life of the battery.
First-time use/
charging batteries
Operation/discharging
36 Operation
To Next Page
Loading...
Need help?
General
