Lexmark MS810 User Manual

Use To
Portrait Height
3–14.17 inches
76–360 mm
Set the portrait height.
Notes:
• If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the US factory default setting. You can increase the
height in 0.01‑inch increments.
• 356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction if the paper can be loaded in either direction.
Notes:
• Short Edge is the factory default setting.
• Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
Bin Setup menu
Use To
Output Bin
Standard Bin
Bin [x]
Specify the default bin.
Notes:
• If multiple bins are assigned the same name, then the
name appears only once in the menu.
• Standard Bin is the factory default setting.
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type Assignment
Specify configuration options for bins.
Notes:
• Mailbox is the factory default setting. This setting
treats each bin as a separate mailbox.
• Link configures all available bins as one large bin.
• Mail Overflow configures each bin as a separate
mailbox.
• Link Optional links all available bins except the
standard bin and only appears when at least two
optional bins are installed.
• Type Assignment assigns each paper type to a bin or
linked bin set.
• Bins assigned the same name are automatically
linked unless Link Optional is selected.
Understanding the printer menus 199

Lexmark MS810 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 55 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Processor Speed	800 MHz
Standard Memory	512 MB
Maximum Memory	2560 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Maximum Paper Size	Legal
Operating System Compatibility	Windows, Mac, Linux
Input Capacity	650 pages (Standard)
Maximum Paper Input	4400 pages

Summary

Safety Information

Overview

Using this guide

Explains how to find instructions for your printer using the table of contents or search function.

Finding information about the printer

Explains how to find instructions for your printer using the table of contents or search function.

Additional printer setup

Installing internal options

Details the process of installing various internal hardware components like memory cards and hard disks.

Installing hardware options

Covers the order of installation for hardware options and specific instructions for installing optional trays.

Troubleshooting

Understanding the printer messages

Explains common error messages related to cartridges, paper, and disk issues.

Print quality problems

Addresses issues like jagged characters, clipped pages, uneven density, and streaked lines.