Lexmark MS810 User Manual

Installing hardware options
Order of installation
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if you are using a high-capacity input tray or more than one input
option. If you purchased a printer with a similar configuration, you may need additional furniture. For more
information, see
www.lexmark.com/multifunctionprinters.
Install the printer and any hardware options you have purchased in the following order:
• Caster base
• 2100‑sheet tray or spacer
• Optional 550‑ or 250‑sheet tray
• Printer
For more information on installing a caster base, optional 250‑ or 550‑sheet tray, spacer, or 2100‑sheet tray, see the
setup sheet that came with the option.
Installing optional trays
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if you are using a high-capacity input tray or more than one input
option. If you purchased a printer with a similar configuration, you may need additional furniture. For more
information, see
www.lexmark.com/multifunctionprinters.
1 Turn off the printer.
2 Unpack the optional tray, and then remove all packing material.
Additional printer setup 31

Lexmark MS810 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 55 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Processor Speed	800 MHz
Standard Memory	512 MB
Maximum Memory	2560 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Maximum Paper Size	Legal
Operating System Compatibility	Windows, Mac, Linux
Input Capacity	650 pages (Standard)
Maximum Paper Input	4400 pages

Summary

Safety Information

Overview

Using this guide

Explains how to find instructions for your printer using the table of contents or search function.

Finding information about the printer

Explains how to find instructions for your printer using the table of contents or search function.

Additional printer setup

Installing internal options

Details the process of installing various internal hardware components like memory cards and hard disks.

Installing hardware options

Covers the order of installation for hardware options and specific instructions for installing optional trays.

Troubleshooting

Understanding the printer messages

Explains common error messages related to cartridges, paper, and disk issues.

Print quality problems

Addresses issues like jagged characters, clipped pages, uneven density, and streaked lines.