Menu item Description
Sides (Duplex)
2 sided
1 sided
Enables duplex (two-sided) printing
Note: 1 sided is the factory default setting.
Print Settings
Setup menu
Menu item Description
Printer Language
PS Emulation
PCL Emulation
PPDS Emulation
Determines which printer language the print server uses to send data to the
printer
Note: PS is the factory default setting.
Print Area
Normal
Fit to Page
Whole Page
Determines the print area on paper
Note: Normal is the factory default setting.
Download Target
RAM
Flash
Collects permanent resources that have been downloaded on the printer and
automatically writes them to the flash drive
Note: RAM is the factory default setting.
Resource Save
On
Off
Saves the permanently downloaded resources
Note: Off is the factory default setting.
Finishing menu
Note: Certain options are not available on selected printer models.
Menu item Description
Sides
2 Sided
1 Sided
Specifies whether duplex (2-sided) printing is set as the default for all print jobs
Note: 1 Sided is the factory default setting.
Duplex Binding
Long Edge
Short Edge
Defines the way duplexed pages are bound and how the printing on the back of
the page is oriented in relation to the printing on the front of the page
Notes:
• Long Edge is the factory default setting.
• Long Edge specifies that binding be placed on the left edge of portrait pages
and the top edge of landscape pages.
• Short Edge specifies that binding be placed on the top edge of portrait pages
and the left edge of landscape pages.
Copies
1–999
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Understanding printer menus
137
To Next Page
Loading...
Need help?
General
