Canceling a copy job
A copy job can be canceled when the document is in the ADF, on the scanner glass, or while the document is printing.
To cancel a copy job:
1 From the printer control, panel press .
Stopping appears, followed by Cancel Job.
2 Press to cancel the job.
Note: If you want to continue to process the job, then press
to continue copying.
Canceling appears.
The printer clears all pages in the ADF or printer and then cancels the job. Once the job is canceled, the copy screen
appears.
Improving copy quality
Question Tip
When should I use Text mode?
• Use text mode when text preservation is the main goal of the copy, and
preserving images copied from the original document is not a concern.
• Text mode is recommended for receipts, carbon copy forms, and documents
that contain only text or fine line art.
When should I use Text/Photo mode?
• Use Text/Photo mode when copying an original document that contains a
mixture of text and graphics.
• Text/Photo mode is recommended for magazine articles, business graphics,
and brochures.
When should I use Photograph mode? Use Photograph mode when the original document is a high-quality photograph
or inkjet print.
Copying
68
To Next Page
Loading...
Need help?
General
