Understanding printer messages
List of status and error messages
Access USB after scan
A USB drive was inserted into the printer while the printer was scanning. From the keypad, press 1 to open the drive
after scanning, or press 2 to ignore the USB drive.
Access USB now
A USB drive was inserted into the printer while the printer was setting up a job (copy, fax, e-mail) or while in
the menus. From the keypad, press 1 to release job resources and access the USB drive directly, or press 2 to ignore
the USB drive and return to the job being set up.
Busy
Wait for the message to clear.
Calibrating
Wait for the message to clear.
Call complete
A fax call is completed. Wait for the message to clear.
Cancel not available
Wait for the message to clear.
Canceling
Wait for the message to clear.
Check Config ID
The printer configuration ID is invalid. Contact Customer Support.
Clock battery
The real-time clock in the printer has a malfunctioning battery. This message appears until the real-time clock battery
is replaced.
Close door
Close the upper and lower doors.
Understanding printer messages
148
To Next Page
Loading...
Need help?
General
