Equipment and service options Fax connection setup
Connect through an adapter used in your area See “Connecting to an adapter for your country or region”
on page 81.
Connect to a computer with a modem See “Connecting to a computer with a modem” on
page 85.
Connecting to an analog telephone line
There is a plug installed in the EXT port of the printer. This plug is necessary for the proper functioning of the
printer.
Note: Do not remove the plug. If you remove it, then other telecommunications devices in your home (such as
telephones or answering machines) may not work.
If your telecommunications equipment uses a US-style (RJ11) telephone line, then follow these steps to connect the
equipment:
1 Connect one end of the telephone cable that came with the printer to the bottom LINE port on the back of the
printer.
2 Connect the other end of the telephone cable to an active analog telephone wall jack.
Connecting to a DSL service
There is a plug installed in the EXT port of the printer. This plug is necessary for the proper functioning of the
printer.
Note: Do not remove the plug. If you remove it, then other telecommunications devices in your home (such as
telephones or answering machines) may not work.
Faxing
76
To Next Page
Loading...
Need help?
General
