D9U001MC0-0101_16
35
11.2 Castor Control and Bed Transport
CAUTION!
Material damage due to incorrect transport and involuntary movement!
► Prior to transport, ensure that the bed is disconnected from the mains.
► Prior to transport, ensure that the auxiliary outlet plug (if available) is disconnected from the mains.
► Ensure that the castors are locked prior to assembly, disassembly and maintenance.
► Ensure that the castors are locked when the bed is occupied.
► Hang the mains cable on the appropriate hook on the bed during transport.
► Have the bed transported exclusively by nursing personnel and by at least 2 persons.
11.2.1 Central Castor Control
The bed is equipped with central castor´s control and brake system.
The control levers are located in the four corners of the undercarriage.
11.2.2 Bed transport
Transporting the bed:
► Adjust bed height to at least 20 cm (9 in.) below maximum height.
► Push bed by handles on head board or foot board.
Castor control lever positions:
1. Forward Movement
The front left castor is locked. The bed moves straight ahead. If the bed is
equipped with a fth castor, this castor determines the direction of move-
ment.
2. Unrestricted Movement
All of the castors are unlocked.
3. Braked
All of the castors are braked.
Fig. Positions of Castor Control Lever
To Next Page
Loading...
Need help?
General
