LINET Multicare User Manual

D9U001MC0-0101_1654
14.6 ALARM
Audible alarm is triggered when patient has left selected monitored zone or when
PAUSE period is terminated and patient is not just in the selected zone. During this
alarm a text „BED EXIT ALARM“ in a red rectangle is displayed on the Bed Exit Mo-
nitoring Screen. Red strip is displayed above the Bed Exit Monitoring Screen Icon
during this alarm.
To stop Alarm:
► Press OFF Icon (5).
Bed Exit Monitoring is deactivated and text „BED EXIT IS OFF“ in a yellow  eld is
displayed on the screen.
The audible alarm is muted.
To pause Alarm:
► Press PAUSE Icon (6).
Fig. Bed Exit Alarm (alert)
Fig. Volume Icon with
3 Volume Levels
1. Minimum Volume
2. Moderate Volume
3. Maximum Volume
1 2 3
Countdown timer (15 min) appears on the display above the yellow PAUSE Icon. The audible alarm is muted.
If the audible Bed Exit Alarm is paused it is not possible to restore the Bed Exit Monitoring with ON Icon (4). In the case ON Icon is
pressed a long beep sounds and PAUSE period continues.
Alarm Volume
It is possible to set Alarm Volume before and during triggered audible alarm.
Maximum Alarm Volume Level is set by default.
It is not possible to mute completely the audible alarm with this volume setting.
To lower Alarm Volume Level:
► Press Volume Icon (7).
Picture with lower Alarm Volume Level (8) appears on the display. Volume is lowered.
To return to Maximum Alarm Volume Level:
► Press Volume Icon (7) after Minimum Alarm Volume Level has been reached.
Picture with the 3 volume levels appears on the display.
14.7 Deactivation
To deactivate Bed Exit Monitoring:
► Press OFF Icon (5).
Text “BED EXIT IS OFF” in a yellow  eld is displayed on the screen.
14.8 Fault Status (disconnected from the mains)
When the bed is disconnected from the mains the Bed Exit Monitoring system is out of order. If Bed Exit Monitoring is turned on
and the bed is disconnected from the mains a fault status appears with text „BED EXIT IS OFF“ in a red rectangle. During this Fault
Status a beeping sounds for 30 seconds and a louder audible alarm follows.
To mute the audible alarm:
► Press the icon on the right side of the red rectangle displayed during this fault status.
To remove this fault status:
► Connect the bed to the mains again.
Fig. Bed Exit is OFF (disconnected from the mains)

LINET Multicare Specifications

General

Brand	LINET
Model	Multicare
Category	Medical Equipment
Language	English