D9U001MC0-0101_1664
Fig. Bottom of Active Mattress (not integrated)
1
1
1
1
1
1
17.2 Active Mattress (not integrated)
WARNING!
Follow instructions for use of a compatible active mattress carefully!
CAUTION!
Risk of material damage due to an incorrect xation of compatible active mattress on the mattress support
platform!
► Adjust the bed to maximum Cardiac Chair Position before xing all the straps of the inated mattress to the
mattress support platform!
Installation instructions:
► Remove any existing mattress.
► Observe mattress dimensions and its orientation before putting it on the Mattress support platform.
► Place SCU on the foot board of the bed or on the oor.
17.3 OptiCare and Symbioso (integrated mattress)
WARNING!
Follow instructions for use of the OptiCare integrated mattress replacement system or instructions for use of
the Symbioso integrated mattress replacement system carefully!
CAUTION!
Risk of material damage due to an incorrect xation of compatible integrated mattress on the mattress supp-
ort platform!
► Adjust the bed to maximum Cardiac Chair Position before xing all the straps of the inated mattress to the
mattress support platform!
WARNING!
OptiCare mattress and Symbioso mattress are compatible with System Control Units delivered by manufactu-
rer only!
► Do not use any other System Control Units with OptiCare mattress or with Symbioso mattress!
CAUTION!
Material damage due to incorrect installation of SCU!
► If the SCU does not come factory-tted, have it installed by a service engineer authorised by LINET ®.
To Next Page
Loading...
Need help?
General
