Linksys LAPN600 User Manual

10
Time Screen
Click Time on the Administration menu to configure system time of the device.
Figure 10: Time Screen
Data - Time Screen
Time
Current Time
Display current date and time of the system.
Manually
Set date and time manually.
Automatically
When enabled (default setting) the access point will get the current
time from a public time server.
Time Zone
Choose the time zone for your location from the drop-down list. If
your location observes daylight saving time, enable “Automatically
adjust clock for daylight saving changes.”
Start Time
Specify the start time of daylight saving.
End Time
Specify the end time of daylight saving.
Offset
Select the adjusted time of daylight saving.
NTP
NTP Server 1
Enter the primary NTP server. It can be an IPv4 address or a domain
name.
Valid characters include alphanumeric characters, "_", "-" and ".".
Maximum length is 64 characters.

Linksys LAPN600 Specifications

General

Color	white
Wi-Fi Speed	600 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.1 pounds