Linksys LAPN600 User Manual

73
Using WPA2-PSK
For each of the following items, each wireless station must have the same settings as the
wireless access point.
Mode
On each PC, the mode must be set to Infrastructure.
SSID (ESSID)
This must match the value used on the wireless access point.
The default value is LinksysSMB24G for radio 1 and
LinksysSMB5G for radio 2.
Note The SSID is case sensitive.
Wireless
Security
On each client, wireless security must be set to WPA2-PSK.
• The Pre-shared Key entered on the access point must also be
entered on each wireless client.
• The Encryption method (e.g. TKIP, AES) must be set to match the
access point.

Linksys LAPN600 Specifications

General

Color	white
Wi-Fi Speed	600 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.1 pounds