104
60 Series 2WD / 4WD, Model - 8560
Routine Service Schedule - 8560 2WD
* Depends upon the conditions in which the tractor is being operated.
# Indicates that this must be done initially at specified hrs.
Activity due.
Repeat the activity.
** Shell Retinax Grease EP2
CHECK POINTS Perio- 10 Hrs. 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 Since then
dically or Daily Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs. Hrs.
ENGINE
Check Oil Level and Top-up if necessary Daily
Change Oil and Filter Element # Every 250 Hrs.
Clean Crankcase Breather Every 200 Hrs.
Torque Cylinder Head Bolts and adjust Valve Clearance Every 1000 Hrs.
Check and adjust Injector Pressure Every 1000 Hrs.
Radiator Descaling Every 1000 Hrs.
Rubber Clutch Gear Hydraulic Pump Every 1000 Hrs.
Greasing for Roller Bearing at Front Cover ** Every 600 Hrs.
AIR INTAKE SYSTEM
Clean dust collector Daily
Check Air-cleaner connections and tighten if required Every 250 Hrs.
Clean Primary Element Every 300 Hrs.
Change Primary Element Every 900 Hrs.
Change Safety Cartridge Every 900 Hrs.
FUEL SYSTEM
Drain Water from Fuel Filters (every 15 days) * Periodically
Change Primary Filter Element (earlier, if required) Every 250 Hrs.
Change Secondary Filter Element (earlier, if required) Every 500 Hrs.
EGR SYSTEM
Cleaning of EGR Valve, Venturi, Cooler & Pipings Every 1500 Hrs.
COOLING SYSTEM
Check Coolant Level and Top-up if necessary Every 50 Hrs.
Check Radiator Hose Connection & tighten if required Every 50 Hrs.
Check Fan Belt tension and adjust if necessary # Every 250 Hrs.
Flush Cooling System Every 1000 Hrs.
ELECTRICAL SYSTEM
Clean Battery Terminals Every 250 Hrs.
Check Starter Motor and Alternator Carbon Brushes Every 1000 Hrs.
& replace if necessary
TRANSMISSION
Check Oil Level and Top-up if necessary # Every 250 Hrs.
Change Oil Every 1000 Hrs.
Clean Strainer (During Every Oil Change) # Every 1000 Hrs.
Change Strainer Every 2000 Hrs.
HYDRAULIC SYSTEM
Change Suction Filter # Every 500 Hrs.
CLUTCH AND BRAKES
Check and Adjust Clutch & Brake Pedal Free Play * Periodically
STEERING
Check Steering Wheel Play & Set Toe-in Every 500 Hrs.
POWER STEERING
Check Oil Level & Top-up if necessary Every 250 Hrs.
Change Power Steering Oil Every 1000 Hrs.
FRONT AXLE, WHEELS AND TIRES
Check Tire Pressure & Inflate if necessary * Periodically
Torque Wheel Nuts # Every 250 Hrs.
Repack & Preload Front Wheel Bearings Every 400 Hrs.
GREASE ALL NIPPLES * Every 50 Hrs.
To Next Page
Loading...
Need help?
General