Driving
5.1 Before driving
Operating manual 3 302 709 en 5 - 9
GMK5150L
12.01.2018
Warning plates for
vehicle width
Depending on the vehicle width and version, fold-up warning plates are
fitted below the driver's cab.
The warning plates (1) must be folded down
to indicate the vehicle width during on-road
driving.
For off-road driving, the warning plates can
be folded up and fastened with the locking
bar (2).
Checking the
vehicle height
The vehicle height given at on-road driving level is only maintained when
the main boom is resting in the boom rest;
à p. 1 - 8.
If the
Vehicle height check function is present, the position of the main boom
in the boom rest is monitored. In this case, a corresponding warning is
shown on the
CCS display if the main boom has not been correctly put
down;
à p. 8 - 16.
s
S
Risk of accidents by exceeding total permissible height
Check whether the main boom is resting on the boom rest.
Otherwise the indicated total height will also be exceeded at on-road level.
To Next Page
Loading...
Need help?
General
