Overview
1.11 EC Declaration of Conformity
1 - 38 3 302 709 en Operating manual
GMK5150L
12.01.2018
1.11 EC Declaration of Conformity
On initial delivery, operators of truck cranes
receive a Declaration of Conformity as a sup-
plement to the delivery protocol. An illustra-
tion of the Declaration of Conformity is
shown below.
The enclosed Declaration of Conformity is
valid only if the truck crane complies with all of
the guidelines and standards specified in the
EC Declaration of Conformity. This applies in
particular to the programming and function of
the overload protection. Only then does the
truck crane receive a CE mark upon delivery.
The Declaration of Conformity shall become
invalid and the CE mark must be removed if
any modifications that do not comply with the
specified guidelines and standards are made
to the crane.
Please refer to the additional information
provided on the EC Declaration of Conformity
supplied.
To Next Page
Loading...
Need help?
General
